- On sale!
Primer for Paint Coating Wall Surface Preparation Deep Penetration W518 5-10L
✅ Optimal substrate preparation for highly absorbent indoor and outdoor surfaces / Solidifies the substrate with excellent deep penetrating effect
✅ Suitable as a primer for following substrates: cement, concrete, screed, plaster and other mineral surfaces
✅ Odorless / Dries quickly / Can be used in the entire living area, even in rooms with insufficient ventilation
✅ Adhesive base binds dust and provides strong adhesion improvement with a firming effect
✅ MADE IN GERMANY / High range = approx. 6-8m²/l
PRIMER FOR MASONRY PAINT 5-10L
TYPE: WOLFGRUBEN WERKE W518
W518 is a special water-based primer for substrates that is used before coating. It is odorless and suitable for both indoor and outdoor application. W518 can be used throughout the entire living area, even in rooms with insufficient ventilation. It penetrates surfaces deeply and reduces consequent substrate absorption.
✅ Primer for highly absorbent indoor and outdoor surfaces
✅ Solidifies the substrate, provides suction equalization and profound consolidation of the substrate
✅ Odorless and quick drying
✅ Strong reduction of absorbency therefore LESS PAINT IS NECESSARY after using W518
✅ Does not impair the diffusion effect
✅ Professionally packed / German BAM certification
High range = approx. 6-8m²
EU limit value for the VOC content of this product (CAT.A / h): 30 g / l of VOC (2010). This product contains max. 30 g / l of VOC.
Substrate must be stable, clean, dry and free of grease. Remove loose parts and wash chalking surfaces with high pressure cleaner.
It is possible to dilute W518 with water, but we do not recommend that, since our product is ready to use.
Recoat: after approx. 10-12 hours
Coverage: approx. 7m² / L
For consolidation and priming of sandy, porous and strongly absorbent mineral substrates, such as plaster, concrete and masonry. Due to high penetration depth, our primer is particularly suitable for our W700 floor paint and W516 facade paint. Primer is easy to work with, ensures an even subsurface and is, therefore, the optimal pre-treatment for your surfaces.