inkl. MwSt.
Kostenloser Versand in DE!
Bestellen SIe jetzt und erhalten Sie ihre Ware innerhalb von wenigen Tagen kostenlos!
Improved adhesion of tile paint can be achieved by sanding the surface with fine sandpaper (180-240 grit) and priming with our Wall floor tile special primer W708.
The tile paint is applied with a roller or brush.
Basically, two coats should be applied.
For a glossy surface, we recommend our 2-Pack Epoxy Resin Floor Sealer
We also recommend our 1 component Tile Varnish for the surfaces without direct water contact. The application of W713 Tile Varnish is even easier, the varnish is satin gloss.
For the MATT finish, we recommend the W712 MATT Paint for ceramic floor wall tiles. For the last coat, Epoxy Sealer W734 Colorless floor protector for concrete is recommended, but BE CAREFUL!!! it gives the SHINY aspect to your surface.
Please also note that an increased number of coats may be required when coating dark surfaces/old coats with light color shades. This circumstance is not product-specific, but naturally applies to paint products from all manufacturers.
Our customer service is available from Monday to Friday from 9:00 AM to 6:00 PM.
Average response time: 24 hours
Optimal Processing Conditions
Which tool is the right one?
How do you clean tools?
It depends on the materials you have worked with:
Cleaning tools contaminated with epoxy resins is a bit more complicated. You should always weigh up cost vs. benefit:
Why is the paint or oil not drying?
Possible reasons:
The surface is still sticky after a few days of drying. What can I do?
Possible reasons:
If the paint was applied thickly or the excess oil was not removed from the surface, the wood may remain sticky.
What to do:
You can use a soda lye with warm water or sand the surface mechanically and then reapply the paint or oil.