2-Pack Tiles MATT Paint for ceramic floor wall tiles W712 2,5-20Kg

The modern 2-component tile paint is a highly opaque and impact-resistant water-based paint. Thanks to the special composition, the 2-Pack tile paint sealant is solvent-free. The 2-Pack tile paint can therefore also be used in living spaces without any odor nuisance.

Improved adhesion of tile paint can be achieved by sanding the surface with fine sandpaper (180-240 grit) and priming with our Wall floor tile special primer W708.

The tile color is applied with a roller or brush.

Basically two coats should be applied.

We also recommend our 1-Pack tile paint for surfaces without direct water contact. The application of W713 tile paint is even easier, the paint has a satin finish.

For the SHINY finish, we recommend the W712 SHINY Paint for ceramic floor wall tiles. For the last coat, Epoxy Sealer W734 Colorless floor protector for concrete is recommended, but BE CAREFUL!!! it gives the SHINY aspect to your surface.

Properties

Suitable for floor, wall and ceiling tiles

Excellent water resistance

For inside and outside / solvent-free

Very good adhesion and high opacity

Heavy duty, chemical resistant

Impact and abrasion resistant surface

Specifications

Consumption: approx. 200-300g/m2 per coat

Can be walked on and painted over after approx. 10-12 hours

Complete (chemical) curing after approx. 7 days

Gloss level: Mat

Processing with a roller, brush or sprayer

Please also note that when coating dark surfaces/old coats of paint with light shades, an increased number of coats may be required. This circumstance is not product-specific, but naturally applies to color products from all manufacturers.

2-Pack tile paint from WO-WE is a high-quality product made in Germany with excellent properties

2-pack tile paint (component A) This product complies with the requirements of Directives 2004/42/EC and 2010/79/EU on the limitation of VOC content. 2-pack tile paint (component B) Causes serious eye damage Keep out of reach of children / Wear protective gloves / protective clothing / eye protection / face protection / IF IN EYES: Rinse cautiously with water for several minutes. If possible, remove contact lenses. Continue rinsing / If skin irritation or rash occurs: Get medical advice/ attention / If eye irritation persists: Get medical advice/ attention / Dispose of contents/container to an appropriate recycling or disposal facility This product complies with the requirements of Directives 2004/42/EC and 2010/79/EU on the limitation of VOC content.