2-Pack Swimming pool paint SL450 2,5-20Kg


Farbe: RAL 1001 Beige
Größe: 2.5Kg
Price:
Sale price€49,90

Tax included Shipping calculated at checkout

Description

KIT CONTAINS: POOL PAINT 2.5KG + HARDENER

  • Consumption: approx. 200-300g / m2 per coat; 2.5kg up to 12.5m2 l 5kg up to 25m2 l 10kg up to 50m2 l 20kg up to 100m2
  • For new and renovation coating of swimming pools / Easy application with a roller
  • Significantly longer service life than normal 1K chlorinated rubber or PU paints
  • High resistance to chlorine, water care products, moisture, salt, acids and alkalis
  • High strength combined with excellent residual toughness
  • Suitable for cement plaster, concrete, primed metal and GRP
  • Versatile application: pool coatings for swimming pools, swimming pools and paddling pools, fountain pools, fountains, etc.
  • Suitable for repainting as well as for pool refreshment or pool renovation.
  • Water-based = environmentally friendly and low-odor

Product data

Product advantages

  • For new and renovation coating of swimming pools
  • Suitable for cement plaster, concrete, primed metal and GRP
  • High coverage
  • Easy application with a roll
  • High strength combined with excellent residual toughness
  • High resistance to chlorine, water care products, moisture, salt, acids and alkalis
  • No “chalking” (formation of a whitish layer) as with 1K swimming pool paints
  • No tendency to drip or "dripping nose"
  • Significantly longer service life than normal 1K chlorinated rubber or PU paints

    Consumption: approx. 200-300g / m2 per coat; 5kg - 25m2 l 10kg - 50m2 l 20kg - 100m2 l 25kg - 125m2

    SL430 2-Pack Pool slurry type sealer and SL450 2K Pool Paint form a perfectly coordinated composite system. The SL430 primarily takes on the sealing function and serves as a bonding agent for the SL450. SL450 ensures a beautiful look and a pleasant feel. Both products are always required on mineral substrates (e.g. tiles, concrete, cement) in order to reliably seal the pool.

    Surface preparation:/h2> The surface must be at least 4 weeks old, must not have any holes or voids (without painting) and be completely dry and clean when the first coat is started. Thoroughly remove loose layers, then wash off the entire surface with a special thinner and only start applying the first layer after it has dried.

    Recommended additional products

  • SL400 - Pool paint
  • SL430 - – 2-Pack Pool slurry type sealer
  • W730 - Stone Carpet set marble gravel floor coating natural stone
  • W733 – 2-Pack Epoxy Resin Primer Adhesive Primer Coating Adhesive Deep Primer
  • W800 – Etching solution
  • W810 – Special cleaner
  • WO-WE Nail Shoes
  • WO-WE Paint roller
  • WO-WE Spiked roller for venting

  • Recently viewed

    Precautions

    2-Pack Swimming pool coating (component A) This product complies with the requirements of the directives 2004/42 / EG and 2010/79 / EU on the limitation of the VOC content. 2-Pack Swimming pool coating (component B) Causes serious eye damage Keep out of the reach of children / wear protective gloves / protective clothing / eye protection / face protection / In case of contact with eyes: rinse cautiously with water for several minutes. Remove any existing contact lenses if possible. Continue rinsing / If skin irritation or rash occurs: Get medical advice / get medical attention / If eye irritation persists: Get medical advice / get medical attention / Dispose of contents / container to a suitable recycling or disposal facility This product complies with the requirements of the directives 2004/42 / EG and 2010/79 / EU on the limitation of the VOC content.